Fixings

The bracket nobody sells

A hook the right depth, a clip that fits your cable, a bracket the right two lengths. Measure it, set it, print it.

Make

Reach35 mm

How far it stands off the wall.

Lip14 mm

Lip angle45°

Measured from the arm. Past 55° the underside needs support.

Arm width14 mm

Arm thickness6 mm

Gusset — the bit that stops it snapping

Screw holes⌀4.5 mm

Zero for none — glue or double-sided tape instead. 4.5 mm clears a No. 8 screw.

Backplate28 × 45 mm

Plate thickness4 mm

Size: —

Triangles: — · Est. weight: —

Recommended: PETG for anything load-bearing 4 walls, 40% infill Print as exported — plate down

A printed part is not a rated fixing. Do not hang anything overhead, or anything whose fall would matter.